Slip Analysis of Conveyor Belt for Breeding

With the continuous development of the aquaculture industry, more and more farmers choose to aquaculture through the conveyor belt for breeding. However, in the process of operation, it is easy to have the problem of slipping of the conveyor belt for breeding, which not only wastes time and energy, but also has a serious impact on production. Let's analyze the reasons and solutions for the slippage of the conveyor belt for breeding.

First, reason analysis. 

1. The tightness is not enough.

The tightness of the conveyor belt for breeding is very important for normal operation. If the tightness is not enough, it will lead to the conveyor belt for breeding can not be firmly fixed on the machine, resulting in slippage.

2. Too much or too little material.

If the material is too much, it will increase the force on the conveyor belt for breeding, so that it can not work normally. On the contrary, if the material is too little, the conveyor belt for breeding will not have enough friction to operate normally.

3. The surface of the conveyor belt for breeding is seriously worn.

The severe surface wear of the conveyor belt for breeding is also one of the reasons for skidding. Because wear will affect the friction between the conveyor belt for breeding and the material, the conveyor belt for breeding can not grasp the material, resulting in the problem of slipping.

Second, the solution. 

1. Adjust the tightness.

First, you can try to adjust the tightness of the conveyor belt for breeding. The adjustment method can be to increase or reduce the tension of the conveyor belt for breeding, or to adjust the fixed frame at the end of the conveyor belt for breeding.

2. Control the quality and quantity of materials.

If there is too much or too little material, it can be solved by increasing or reducing the amount of material. At the same time, we should also pay attention to the quality of the material to ensure that the surface of the material is smooth and avoid insufficient friction.

3. Perform regular maintenance.

Regular inspection and maintenance of the conveyor belt for breeding, such as cleaning, lubrication, etc., can extend the life of the conveyor belt for breeding, reduce wear, so as to avoid the problem of slipping. At the same time, timely replacement of the parts with more serious wear can also effectively solve this problem.

In general, although the slipping problem of the conveyor belt for breeding seems to be a small problem, it will actually have a serious impact on production. Only by correctly analyzing the cause of the problem and adopting the correct solution can we ensure the normal operation of the conveyor belt for breeding and make the breeding industry develop more efficiently and stably.